FAQ
FAQ:
✱The bait boat navigates in a wide arc;
If the boat travels in an arc during navigation, check it from the following aspects.
a)Whether the boat's electronic compass is calibrated;
b)Is the compass of the boat working properly? By manually rotating the hull to observe whether the compass arrow on the remote control rotates with the hull rotation to determine;
c)Is the output ratio of the left and right motors consistent in the Settings?
d)Check whether the propellers on the left and right motors are tangled with debris.
e)Is there strong magnetic field interference around the operating environment?
f)If the above problems are eliminated, then update to the latest boat software can solve the problem;
✱The remote control won't control the boat
Turn off the power supply of the bait boat, select "boat channel" from the setting menu of the remote control, select a new channel and press the "OK" button, then turn on the power supply of the bait boat for matching. If the match fails, just try a few more times;
✱Water depth cannot be displayed in the Fish Finder screen;
a)Is the water depth between 0.6-80m, and if the water depth is less than 1 m, is the bottom infested with weeds or floating objects?
b)If the general range of water depth is known, manually select the appropriate depth range in sonar Settings according to the depth range, which is conducive to sonar signals to quickly detect underwater signals. Generally, there are silt on the bottom, and the soft environment at the bottom is not conducive to the reflection of acoustic signals, so it is necessary to manually set the depth range;
c)Sonar probe damage can not successfully detect the bottom, at this time can be replaced with several different scenarios test;
✱Poor positioning accuracy;
✱The bait boat navigates in a wide arc;
If the boat travels in an arc during navigation, check it from the following aspects.
a)Whether the boat's electronic compass is calibrated;
b)Is the compass of the boat working properly? By manually rotating the hull to observe whether the compass arrow on the remote control rotates with the hull rotation to determine;
c)Is the output ratio of the left and right motors consistent in the Settings?
d)Check whether the propellers on the left and right motors are tangled with debris.
e)Is there strong magnetic field interference around the operating environment?
f)If the above problems are eliminated, then update to the latest boat software can solve the problem;
Turn off the power supply of the bait boat, select "boat channel" from the setting menu of the remote control, select a new channel and press the "OK" button, then turn on the power supply of the bait boat for matching. If the match fails, just try a few more times;
a)Is the water depth between 0.6-80m, and if the water depth is less than 1 m, is the bottom infested with weeds or floating objects?
b)If the general range of water depth is known, manually select the appropriate depth range in sonar Settings according to the depth range, which is conducive to sonar signals to quickly detect underwater signals. Generally, there are silt on the bottom, and the soft environment at the bottom is not conducive to the reflection of acoustic signals, so it is necessary to manually set the depth range;
c)Sonar probe damage can not successfully detect the bottom, at this time can be replaced with several different scenarios test;
- GPS satellite signals are affected by the weather and the surrounding environment. If the weather is bad on that day and the clouds are thick, and there are trees, buildings and other obstacles above or beside the bait boat, the satellite signals will be poor.
- When we go to a new place and start to use it, we need to make the bait boat search enough on the shore to get the satellite signal before we put the bait boat into the water. Usually, the effect of using the boat will be better when the positioning accuracy of the navigation page is less than 1.5 meters.
- Recalibrating the bait boat's electronic compass also allows better positioning during navigation.
Message
If you have any suggestions or question for us.Please contact us.









